Thingiverse
CS1/CSR/160R Deuce Trigger
par deus003
25
Téléchargements
12
Likes
1
Makes
Tools:
Drill
Helicoil Installation Tool
https://www.amazon.com/ZFE-Helicoil-Thread-Repair-Insertion/dp/B00RFKHHRW
Helicoil
Stainless Steel Helical Insert, M2.5 x 0.45 Thread, 2.5 mm Long
91732A764
Instructions:
Print the file using 1mm supports

Remove supports from the back of the trigger andthrough all the holes.

Print using the proper settings for your printer and material.
Finishing may be accomplished by sanding, Acetone Vapor Bath, or whatever method is required for the material being used.
Use the drill from the helicoil installation kit to drill out all 3 holes in the trigger.
Use the tap from the kit to tap the center hole.

Install the helicoil per the kit instructions.
Install the trigger on your CS1/160R. Enjoy!
Drill
Helicoil Installation Tool
https://www.amazon.com/ZFE-Helicoil-Thread-Repair-Insertion/dp/B00RFKHHRW
Helicoil
Stainless Steel Helical Insert, M2.5 x 0.45 Thread, 2.5 mm Long
91732A764
Instructions:
Print the file using 1mm supports

Remove supports from the back of the trigger andthrough all the holes.

Print using the proper settings for your printer and material.
Finishing may be accomplished by sanding, Acetone Vapor Bath, or whatever method is required for the material being used.
Use the drill from the helicoil installation kit to drill out all 3 holes in the trigger.
Use the tap from the kit to tap the center hole.

Install the helicoil per the kit instructions.
Install the trigger on your CS1/160R. Enjoy!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
