Cube

Cube... I used Slot, Hex, square, circle, triangle, ellipse and cube - several stable positions to place them on a surface and also different kinds of exposed The idea behind my design My project is a simple cube with a dome surface that consist of different expose surfaces due to different shapes that I placed on each surface of the cube. I tried to keep my design simple, easy for 3D printing and 2 mm wall thickness to save material. To make this model bigger or smaller you can simply change the dimension of the cube, all the other shapes will follow the outside of the cube. I think all the grippers can be tested on this model except magnet grippers due to 3D printing. Suction grippers will find it bit difficult but I think if someone create a suction gripper that works similar than a octopus with small suction cups not just one it can also use this model quite well. If you view this model in isometric view it almost looks spherical and grippers will find it tricky because not all the side are equally to one another. Thank you for viewing my model