Cube calibration 20 mm

This is a 20x20x20 mm calibration cube designed to test your 3D printer's accuracy and optimize print settings. The cube includes features for measuring dimensional precision and analyzing filament retraction. Perfect for fine-tuning your printer, ensuring clean corners, and minimizing stringing or blobs.Layer Height: 0.2 mm (for standard resolution)Wall Count: At least 2 walls for dimensional stabilityInfill: 100% Print Speed: 50-60 mm/s for consistent resultsRetraction Settings: Test with default values first (e.g., 1-2 mm retraction distance and 20-40 mm/s speed). Adjust based on stringing observed.Bed Adhesion: Use a heated bed at 60°C if printing in PLA or increase according to filament requirements. Apply glue stick or painter’s tape for additional adhesion if necessary.Cooling: Enable part cooling for sharper edges.