Cube Puzzle

This is a simple puzzle cube to test yours or your friends minds. It starts off as a long snake of cubes and you need to manipulate them to become a 3x3 square cube. Just need a 3mm X 560mm piece of elastic cord to attach all the parts together.


Note: I added a half end cube STL that you can use for a test print to check how well the holes come out beforehand. Then you can make any print adjustments if needed in your slicer.


PRINTING:

Position: Print as shown.
Material: Doesn't mater, but should use two different colors
Resolution: 0.15
Adhesion: Skirt
Supports: No


ASSEMBLY:

There should be a total of 27 cubes and 2 plugs when done printing. Check out the assembly image for the order for them to go onto the elastic cord. The number of each piece and colors needed are as follows (color called out per assembly image).

Straight = 9 (3 Red - 6 White)
Curves = 16 (9 Red - 7 White)
Ends = 2 (Red)
Plugs = 2 (Red)

Note: There are two STL's for the plug