Cubicle Coathook

This is a coat hook intended to be hung over a cubicle partition wall. I've uploaded single- and double-sided versions for different wall thicknesses; the respective file names are hanger_XXmm.stl or double_hanger_XXmm.stl, where XX is the partition thickness. If you need a size not provided, you should be able to scale a file that's close by the appropriate amount in your slicer software.

For FDM-type printing, the design should not require supports if it's printed upside-down. For this, you'll require **super** good bed adhesion, otherwise the print is destined to fail. I've only had success so far with PETG, as PLA has broken loose of the bed every time at a few hours into the print. This is even with a brim.

Here are links to time lapse videos of printing this model: a [failure](https://vimeo.com/786942349), made with PLA and no brim, and a [success](https://vimeo.com/787259615) using PETG and a brim.

Both the rendering and video editing used Blender.