Cura wireprint

//////////////// ENG
you can find information on Ultimaker website https://ultimaker.com/en/resources/16523-fixes

The Wire Printing mode is Experimental Mode from CURA
- you need to select the mode for have acces to setting
- you can start to use the " original " setting for your first print

- Don't forget the nozzle size you use (you can't extrude more than 80% of your nozzle size)
==> 0.4x0.8 = 0.32
==> 0.6x0.8 = 0.48
==> 0.8x0.8 = 0.64
==> 1x0.8 = 0.8 (I use this one, so my 1st layer is 0.8/ sometime I put more, like 1)

After you need to optimise the connexion beetween roofs and the head of triangles. I have drawn for explain the cases of WP cause there are many strategies for create connexions.

Create your G-code with Cura, and read this file in Repetier (or what you want).
Cura can't reading the G-code directly, you need to download you G-code after have saved.
I work with the 2 softwares : cura for slice / repetier read and run the machine.

If you have