Slicer Discord
Custom Drawer Divider Brackets – 3D printable model from MakerWorld MakerWorld
Organizers

Custom Drawer Divider Brackets

5.6k Downloads
4.1k Likes
2.8k Makes
Go to Model
I set out to design the simplest and versatile organization system that I could use everywhere. And I couldn't be happier with the final design! The small brackets are designed to be used with hardboard for the dividers. The brackets can be easily printed and and are a perfect fit for the thickness of hardboard. Because the dividers don't need to be printed, this is likely the fastest possible solution for making custom dividers. Hardboard is cheap (you can usually get it half off at the big box stores if you can find a slightly damaged sheet) and very easy to work with and cut. If you have another material instead of hardboard, you may need to scale the brackets appropriately. They fit perfectly on 1/8" hardboard which is .1125 in or 2.85mm. I will also do my best to design brackets for other materials if requested! Just leave a comment. ModelThere are 7 bracket types: T, corner, end cap, cross, connector, hex, and hex corner. For each bracket type, there is a model with a
Category
Organizers
Source
MakerWorld
Published
Updated
What you need to print this: Advanced Low confidence
Supports 1/3
Assembly 2/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection