Custom Enclosure (v1)

Start of an enclosure project. I will update as the design is finalized (I will repost the final version with more detailed assembly instructions).

There is an SCAD file which can be used to adjust all the settings. The stl are sized for 2x2 framing (roughly 1.5"x1.5"). I would recommend printing a sample part (stopping after a couple layers), to confirm your stock material (and printer calibration) is sized correctly as it will be a fairly tight fit.

Can be printed without support (but will have a significant amount of bridging), be aware that the bridging will shrink causing the walls to pull in slightly. This will create a visual defect, but the amount should be low enough that it will not affect function (at least with PLA).

Current state of design.
- Corner brackets print and are functional
- Side panel material is TBD, sized for pink ridgid insulation
- Front door TBD