Custom Ender 3 Print Head

This is my own design of a custom print head for a Creality Ender 3. While the stock Ender 3 is a good starter printer and is for the most part very reliable and easy to use there is always room for improvement. I saw what a friend of mine had done with an Ender 3 Pro and I recently bought it off him and it inspired me to do something similar to my own. This will fit to the existing plate for the printhead but you will have to take it right apart to fit everything together as the main plate of this project is held on by the screws from the rollers on the plate as well as the hotend needing to go in front of the main plate.

For the most part this project is pretty easy to print and put together but there are a couple tricks I figured out after printing all of these parts multiple times during testing. When printing the centrifugal fan bracket, print it with the fan mating surface face up and make sure there is lots of supports to hold it down and limit the amount of bridging. I had