Thingiverse
Customizable and modular lithophane lamp
door distrubi
65
Downloads
53
Likes
0
Makes
Customizable Modular Lithophane USB Lamp
====================
____
Here's the lithopane lamp I designed a few years ago:
https://www.thingiverse.com/thing:3214145
You can print the 4 lithophanes and the base as one piece by merging the parts into one single model. You can also print the parts individually and glue them together. I've uploaded a small cover stripe so you can cover the gap between the lithophanes.
____
Because I wanted to be able to switch the lithopanes, I designed this new modular version of the lamp.
**You'll need:**
* 4/8/... (different) lithophanes
*I've used the following site to create them: http://3dp.rocks/lithophane/*
*Make sure to use pictures with a 1:1 ratio *
*On the website select "outer curve" model*
*Set your model settings to maximum size 100mm, thickness 3mm and border 3mm*
*Also choose "positive image" in the image settings*
*Set Curve to 85*
* Mini USB LED with magnet (or similar)
*I've used this one:*
*[Aliexpress] https:
====================
____
Here's the lithopane lamp I designed a few years ago:
https://www.thingiverse.com/thing:3214145
You can print the 4 lithophanes and the base as one piece by merging the parts into one single model. You can also print the parts individually and glue them together. I've uploaded a small cover stripe so you can cover the gap between the lithophanes.
____
Because I wanted to be able to switch the lithopanes, I designed this new modular version of the lamp.
**You'll need:**
* 4/8/... (different) lithophanes
*I've used the following site to create them: http://3dp.rocks/lithophane/*
*Make sure to use pictures with a 1:1 ratio *
*On the website select "outer curve" model*
*Set your model settings to maximum size 100mm, thickness 3mm and border 3mm*
*Also choose "positive image" in the image settings*
*Set Curve to 85*
* Mini USB LED with magnet (or similar)
*I've used this one:*
*[Aliexpress] https:
distrubi publiceert ook op
37 extra modellen op 3 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
