Customizable Cable Zip Tie Mount

Customizable IKEA Skadis compatibile board.With this parameterizable model, you can generate original (blue), i.e. thick edge, or classifiable (pink), i.e. side-by-side, Skandis plates. The program automatically calculates its physical dimensions, you only need to enter the number of holes in the X and Y directions. You can set the folowing parameters:main_thicknessmain_widthmain_lengthcorner_radiusmain_hole_diameterfor countersunk head screws, set the larger diameter, for non-countersunk screws, set it to the same as hole_dia:hole_dia_screw_headhole_screw_heigthzip_tie_thicknesszip_tie_widthzip_tie_top_thicknesszip_tie_cut_correctionResolution of circle:fn = 64 (recommend 64) Use a very clean plate because the adhesion will not be adequate and I recommend using a plate with good adhesion such as textured PEI or PEI plate. My modells: my modells.My Customizable modells: clickIf you are satisfied with my work, please, in addition to downloading the model, printing and evaluating it, you