Thingiverse
Customizable Camera Arm (Female ends)
por Scnd_edition
35
Descargas
22
Likes
0
Makes
Main post is located at https://www.thingiverse.com/thing:3317860
This is a customizable camera mount arm that can support M3 through M6 sized screws, can be sized in length from 31mm+ and adjustments can be made to improve fix and motion of arms.
The default settings are for M3 screws. Everything fits well, but note that the nut capture is intentionally very tight so that tightening the screw will pull the nut in to the slot. Adjust the allowances if you have difficulty getting the nut to sink in to the slot.
This is a customizable camera mount arm that can support M3 through M6 sized screws, can be sized in length from 31mm+ and adjustments can be made to improve fix and motion of arms.
The default settings are for M3 screws. Everything fits well, but note that the nut capture is intentionally very tight so that tightening the screw will pull the nut in to the slot. Adjust the allowances if you have difficulty getting the nut to sink in to the slot.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!