Slicer Discord
Customizable Chain Link – 3D-Druckmodell von Thingiverse Thingiverse
Customizable Chain Link – Bild 1 Customizable Chain Link – Bild 2 Customizable Chain Link – Bild 3 Customizable Chain Link – Bild 4
Tools

Customizable Chain Link

von Dmelcer9 · Tools
157 Downloads
135 Likes
0 Makes
Zum Modell
Chain link which is customizable for amount of links, type (if the chain loops back into itself, or is straight), and how close the links are to each other (leave at 5, normally). I found part of source code online (on the OpenSCAD github wiki), but I changed it enough to be significantly different.
It probably won't print without a lot of supports (it has floating sections), and plastic isn't a recommended material for chains.
It may have to be scaled up/down, but that is a simple operation on a slicing program.
Currently, each link is about 4mm diameter on the ends, and is about 24mm from one end to another (approx. 17mm the short way)
None of this is by any means accurate; however, a person 3d printing a plastic chain probably doesn't need accuracy (or strength, for that matter).
A stretch of 0, or a number of links below 8, causes links in some configurations to fuse together. If problems occur, try setting stretch to 5, and the links to a large even number.
Straight ch
Kategorie
Tools
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen