Thingiverse
Customizable Compartment Box V3
by dede67
60
Downloads
59
Likes
1
Makes
Here is version 3 of my sorting box. Like [V2](https://www.thingiverse.com/thing:3145489), it's also meant for smaller boxes.
Unlike [V1](https://www.thingiverse.com/thing:3135033) and V2, V3 can be printed in a single job.
Despite the small wall thickness, it is quite stable because of the integrated bracing. In addition, it is printable without retraction.
If "fhs, floor height (solid)" is set to zero, you will probably see some warping at the corners....find them on the photos ;-). Thats why it is better printed with one layer of *solid floor*.
The number (and position) of dividers can be configured in **Customizer** and a *label holder* can be attached to the front.
Filament usage for a 65x150x40mm box (with one divider) is 39g / 5m and it takes about 2:30h to print (@my printer/configuration).
Unlike [V1](https://www.thingiverse.com/thing:3135033) and V2, V3 can be printed in a single job.
Despite the small wall thickness, it is quite stable because of the integrated bracing. In addition, it is printable without retraction.
If "fhs, floor height (solid)" is set to zero, you will probably see some warping at the corners....find them on the photos ;-). Thats why it is better printed with one layer of *solid floor*.
The number (and position) of dividers can be configured in **Customizer** and a *label holder* can be attached to the front.
Filament usage for a 65x150x40mm box (with one divider) is 39g / 5m and it takes about 2:30h to print (@my printer/configuration).
dede67 also publishes on
7 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
