Customizable flat field box

Simple flat field box particularly suited for small lenses/telescopes, but highly customizable.
SCAD sources are included, just change values in `flatbox-config.scad` and then open and generate the appropriate file (you can also use the included `Makefile`).
Required parts (apart from printed ones):
- white acrylic/perspex round panels. Be careful to choose the white version, NOT tranparent.
- white leds. I recommend adhesive led strips, so they can be attached without glue
- wires: very thin wires for internal wiring, bigger wires for (external) power supply
- 2.1mm jack socket (optional) for powering via 12v 2.1mm jack


How to build: 25% infill, 0.2mm layer height, no supports required.

How to assemble: put as many leds as you want on the base bottom (I used adhesive led strips). Wire them to a cable, or a socket if you prefer (I used 2.1mm jack socket). The cable/socket has to pass through the base hole.

Now you should have printed 4 spacers, or 1 spacer and 3 d