Thingiverse

Customizable Lens Filter Case

by walter

1.2k Downloads

1.1k Likes

7 Makes

Go to Model

Customizable magnetic case for holding lens filters or other similarly shaped objects. The magnets work as a hinge, and to hold the case closed. If the cases are the same size, they will also stack nicely, with the magnets holding them together..

**Printer:**
--[Afinia H480*](https://www.amazon.com/Afinia-H480-AFINIA-3D-Printer/dp/B00ISIV1QI/ref=as_li_ss_tl?ie=UTF8&qid=1455258411&sr=8-1&keywords=afinia&linkCode=sl1&tag=whirligh03-20&linkId=f9361e957929d53402884fed662b8e02)

**Filaments:**
-- [Up! Yellow ABS](http://thrinter.com/walters-filament-collection-abs/#up-yellow)
-- [Afinia Orange ABS](http://thrinter.com/walters-filament-collection-abs/#afinia-orange)
-- [Octave Flourescent Green ABS](http://thrinter.com/walters-filament-collection-abs/#octave-fgreen)
-- [Octave Flourescent Yellow ABS](http://thrinter.com/walters-filament-collection-abs/#octave-fyellow)
-- [Octave Blue ABS](http://thrinter.com/walters-filament-collection-abs/#octave-blue)
-- [Octave Glow in t

case customizer Customizer Challenge filter lens lens filter magnet neodymium openscad parametric rare earth useful case customizer Customizer Challenge filter lens lens filter magnet neodymium openscad parametric rare earth useful case customizer Customizer Challenge filter lens lens filter magnet neodymium openscad parametric rare earth useful

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format