Thingiverse
Customizable Model Loading Dock with Optional Ramp/Steps
door elindow
470
Downloads
236
Likes
4
Makes
This is a customizable rectangular loading dock designed to produce a usable scale model, either stand-alone or be placed alongside a building . It was designed in openSCAD for HO scale but should work in other scales as well depending on printer parameters.The basic dock variables are self-explanatory: length, width and height. In addition you can change the scale in use to match your purposes and units. Instead of 3.5 mm to a foot, you could for example use 6.25, which if my math is right would be N scale in meters. Note that if you do change the units to metric you will probably want to change the board parameters to match (i.e. you probably don't want a board 1/4 of a meter thick).
This model is simple enough to render that the Thingiverse customizer should be usable for all but the largest and most complex designs. However, as always, loading the design directly into openSCAD (free/open source at (http://www.openscad.org/index.html) will in the long run be faster and simpler.
This model is simple enough to render that the Thingiverse customizer should be usable for all but the largest and most complex designs. However, as always, loading the design directly into openSCAD (free/open source at (http://www.openscad.org/index.html) will in the long run be faster and simpler.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
