Thingiverse
Electronics
Zum Modell
Customizable PCB Housing
111
Downloads
57
Likes
0
Makes
Simple housing for (single sided) printed circuit boards.
Top and bottom parts snap together and lock the PCB in place. On the left and right sides there are openings for cables going in and out the case.
When printed in white or transparent LED lights will still be visible with the case closed.
Just open in OpenSCAD or Customizer, enter the dimensions of your PCB ( length, width and height of the parts+pcb ) and start printing.
Note: For propper fitting your PCB needs to be single sided ( SMDs on the bottom might be possible ) and have a 1-2 mm clear margin on all sides ( no parts mounted or solder on the bottom ).
Top and bottom parts snap together and lock the PCB in place. On the left and right sides there are openings for cables going in and out the case.
When printed in white or transparent LED lights will still be visible with the case closed.
Just open in OpenSCAD or Customizer, enter the dimensions of your PCB ( length, width and height of the parts+pcb ) and start printing.
Note: For propper fitting your PCB needs to be single sided ( SMDs on the bottom might be possible ) and have a 1-2 mm clear margin on all sides ( no parts mounted or solder on the bottom ).
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
