Customizable Spool V2

DescriptionAn easier and lighter version of the Customizable Spool V1. Perfect for using in an AMS, when the filament you have came on a cardboard spool.Guide to replacing the cardboard for AMS Compatible spool:First measure the distance between the sides of the spool.Put tape over the filament, to prevent it from winding out. Check inside the hole of the spool, and find out on which side the filament is stuck through.Rip that side off.Measure the inside diameter of the cardboard spool.Open the Model Maker by pressing Enter the measured inside diameter in spool_core_diameter.Enter the core width we measured in step 1.Print the test ring, and check if it fits well. Check the diameter with the ring, it should fit, but not turn inside the cardboard.Check the height with the rectangle tester, by placing it in the hole, and checking if it's the same height. (Watch out, some brands have an