Thingiverse
Cute Golden Retriver
door Tigrilacelportocaliu
4
Downloads
13
Likes
0
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Paramount 3D Skin-Universal Beige Transmission Distance: 12
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Beige
At layer #9 (0.8mm) swap to Skin-Universal Beige
At layer #15 (1.28mm) swap to White for the rest.
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Paramount 3D Skin-Universal Beige Transmission Distance: 12
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Beige
At layer #9 (0.8mm) swap to Skin-Universal Beige
At layer #15 (1.28mm) swap to White for the rest.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
