Cute Cat (Designed by Daughter)

3D Print Description & Settings: Chibi Cat CompanionModel Description This is a Chibi Cat Companion print, a simplified, stylized figurine of a cat with large ears and closed, serene-looking eyes. The design features a smooth, rounded body and head. This particular print was executed in a light pink/peach colored filament with a semi-gloss finish.Suggested Print Settings Printer: FDM (Fused Deposition Modeling) Material: PLA (Polylactic Acid) Filament Color: Light Pink/Pastel Peach Nozzle Size: 0.4 mm Layer Height: 0.16 mm or 0.2 mm (A moderate layer height for a good balance of speed and detail.) Infill Density: 10% to 20% Supports: Required. Supports are needed for the overhangs of the arms/legs and chin. They should be standard or tree supports from the build plate only. The image clearly shows support material removal points under the 'arms'. Adhesion Aid: Skirt or Brim (A small brim or raft was used under the base of the supports for better bed adhesion.)Post-Processing Minimal post-processing was required. The supports under the arms/legs were removed, and the base adhesion aid was detached.