Cute view orange cat

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Orange Transmission Distance: 5.7 PLA Smart Recycled Green Transmission Distance: 6.5 PLA Smart Recycled Silver/Gray Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to Green At layer #26 (2.16mm) swap to Silver/Gray At layer #27 (2.24mm) swap to White for the rest.