Cyber Super Mario - String Lamp

Inside a futuristic cylindrical chamber, Mario is suspended in mid-air, undergoing a cybernetic transformation. His body is laced with intricate mechanical implants and glowing circuitry, merging flesh with machine. Set your pucks to red and blue and illuminate his form, emphasizing the fusion of low poly muscle and advanced robotics.    Make your desk feel like a high-tech laboratory where Mario is being upgraded, preparing for his ultimate battle against Bowser. No longer just a plumber, he is evolving into a cyber-enhanced warrior, engineered to overcome his greatest enemy with newfound power.   Boost Me SPECIAL NOTE!!!!!   Try not to use the Super Tack plate, taking the print off may damage the strings. Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks. But, you also need to have proper adhesion, clean your plate and watch the print so you get the best results possible.   To light it you will need two standard 3AAA RGBW pucks, either from Aliexpress or bambu lab.    Here is a link from a seller I used before, you get 3 pucks for a euro. Cant beat those prices! Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings that will fit exactly to the two halves, just make sure you put a paper down so the glue doesn't leak and ruin your table (ask me how I know). There are nubs in the provided bases and it will keep it in place for a desktop stand, but carrying it around without gluing it, is not advised… if you are happy with it and do not wish to reuse the base for my other models, go ahead and glue it. Also, DO NOT change layer size because then the mid air strings may fail. Any issues, let me know.