CyberBrick TestStation

Received the CyberBrick Kit and need to test the components. This TestStation (100mmx100mm) can install all the output devices from the hardware kit for testing. It can also be used as a testing ground for new project. The Remote configuration in the JSON is using the CyberBrick Official Standard Remote. The TestStation comes with two mounts for 030 motors. If you want to test the N20 motor, a mount for N20 will be coming soon. Installation Procedure Connect the Servos, Motors and LED Hubs according to the following picture. If you are using Beginner Hardware Kit, Just connect the LED1, PWM1, PWM3 and two 030 motors Connect the RGB LEDs to the LED Hubs, 030 Motors to the Motor mount. Put all the devices to the TestStation as below. Screw the Receiver and LED Hubs to the TestStation. Put the Pointers to the Servos and 030 Motors to monitor their movement. Insert the 030 Motor into the mount and put the motor mount into the slot of the TestStationInsert the RGB LED into the slot as in th