Thingiverse
Cyberdeck - Surge
door Bootdsc
96
Downloads
66
Likes
0
Makes
Your mission, assemble a class 9.0 or higher deck with SDR receiver.
Built as a means to simplify using my sdr radio teathered to my phone.
Hardware and Materials:
JB kwik
M4 Bolts
Motorola BT Keyboard
NooElec NESDR Smart v4
Anker PowerCore+ Mini
USB OTG, USB C Hub or USB C to A adapter.
Cloverleaf or whip Antenna
plastic washers
https://imgur.com/gallery/k2fJga3
Start by rough sanding any areas that will be glued. Next up drill out the holes to snugly fit the M4 bolts. Glue the handle to the keyboard, use a flat surface to align the pieces. Once the glue hardens tape off and paint. Assemble the 3 pieces, use thin washers to take of the slack. Glue in the symbol backing plate, let it harden then glue in the two pieces for the center of the symbol.
Built as a means to simplify using my sdr radio teathered to my phone.
Hardware and Materials:
JB kwik
M4 Bolts
Motorola BT Keyboard
NooElec NESDR Smart v4
Anker PowerCore+ Mini
USB OTG, USB C Hub or USB C to A adapter.
Cloverleaf or whip Antenna
plastic washers
https://imgur.com/gallery/k2fJga3
Start by rough sanding any areas that will be glued. Next up drill out the holes to snugly fit the M4 bolts. Glue the handle to the keyboard, use a flat surface to align the pieces. Once the glue hardens tape off and paint. Assemble the 3 pieces, use thin washers to take of the slack. Glue in the symbol backing plate, let it harden then glue in the two pieces for the center of the symbol.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
