Cyborg portrait - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 136.83x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.5mm and the Actual Depth is 2.5mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PLA PolyLite Pro Orange Transmission Distance: 7.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal Black At layer #9 (0.84mm) swap to Red At layer #12 (1.08mm) swap to Orange At layer #16 (1.4mm) swap to White for the rest.