CyborgSkull with Handguns

Project: CyborgSkull with HandGuns_V1_BGrey_Cyan_SkyBlue.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 108.4x162.6mm in size You may print at higher layer heights below the Base Thickness of 1.52mm The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm #000000 PLA Sunlu Meta Black Transmission Distance: 1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #ffffff PLA Sunlu Meta White Transmission Distance: 8 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Blue Gray At layer #25 (2.08mm) swap to Cyan At layer #28 (2.32mm) swap to Sky Blue At layer #33 (2.72mm) swap to White for the rest. (If you are using the 4color swap out the black and add white)