Tools
Zum Modell
Cyclone filter for workshop/cnc vacuum cleaner
347
Downloads
234
Likes
0
Makes
Simple filter cyclone to do with a CNC milling machine.
You will need:
- 12mm thick plywood sheet (600x460mm)
- 1mm thick sheet of PET (1000x500mm)
- 50mm diameter sewer pipe with the cup with a length of 500mm
- 6 screws M5X45 with nuts and washers
- CNC mill, hotglue gun and dermel
I built this filter to my CNC machine, dust was collected in an industrial vacuum cleaner which unfortunately fairly quickly filled.
The filter is attached to a steel barrel with a capacity of 60l (needed the extra cover - is not in the files).
Now the dust and debris getting into the barrel and the vacuum cleaner is clean.
You will need:
- 12mm thick plywood sheet (600x460mm)
- 1mm thick sheet of PET (1000x500mm)
- 50mm diameter sewer pipe with the cup with a length of 500mm
- 6 screws M5X45 with nuts and washers
- CNC mill, hotglue gun and dermel
I built this filter to my CNC machine, dust was collected in an industrial vacuum cleaner which unfortunately fairly quickly filled.
The filter is attached to a steel barrel with a capacity of 60l (needed the extra cover - is not in the files).
Now the dust and debris getting into the barrel and the vacuum cleaner is clean.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!