Thingiverse

Cyclonic aspiration

by dh101083

8 Downloads

7 Likes

0 Makes

My cyclonic aspiration project. Printed very well with no support with a 0.8mm nozzle in 0.32mm layer high but it can be printed with smaller nozzle and thinner layer

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.32mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Layer height

0.32 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Cyclonic aspiration?

Any FDM printer should handle Cyclonic aspiration just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Cyclonic aspiration need supports when printing?

No supports needed for Cyclonic aspiration — it's designed to print clean off the bed.

What file format is Cyclonic aspiration available in?

Cyclonic aspiration is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Cyclonic aspiration free to download?

Yes, Cyclonic aspiration is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Cyclonic aspiration

Add to Collection