Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Other Miniatures / Cyclops for Battletech
Cyclops for Battletech – 3D printable model from MakerWorld MakerWorld
Other Miniatures

Cyclops for Battletech

by JediMaveriC · Other Miniatures
78 Downloads
54 Likes
31 Makes
Go to Model
🛰️ Model: Cyclops🎨 Original Design by: MiniHulkMechs (used with written permission)🛠️ FDM-Optimized by: JediMaveriC☕ Support my mechbay: https://ko-fi.com/jedimaveric The Cyclops is an 90-ton assault mech best known for its battlefield command role. Equipped with the advanced Tacticon B-2000 system, it serves as a mobile command center that keeps entire units coordinated. Despite its leadership focus, the Cyclops still hits hard, carrying enough firepower and armor to stand in the line of battle when needed. Distinctive, imposing, and instantly recognizable with its domed head and high-mounted sensors.Assembly Instructions:Caution: Be very careful when removing supports from the antennas – they are fragile and may snap.Glue the two torso halves together. Use the guide peg for alignment (trim it shorter if needed).Glue the torso assembly to the legs.If you like the model, make sure to support the original creator HERE
Category
Other Miniatures
Source
MakerWorld
Published
Updated
What you need to print this: Advanced Medium confidence
Why?
supports needed · very large print
Single piece Supports required May need scaling or splitting
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 3/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
300 mm (Extra large)
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Cyclops for Battletech?
Any FDM printer should handle Cyclops for Battletech just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.
Does Cyclops for Battletech need supports when printing?
Yes, Cyclops for Battletech will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is Cyclops for Battletech available in?
Cyclops for Battletech is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Cyclops for Battletech free to download?
Yes, Cyclops for Battletech is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
CP-10-Z Cyclops for Battletech
CP-10-Z Cyclops for Battletech
by Matt Mason
♥ 348
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection