Thingiverse

D22 cup holder insert for small cans

by jono1551

1 Downloads

2 Likes

0 Makes

This slides over the cup ring and makes the slot smaller for small cans :)

If to snug put print in boiling water and press into place.

10-20 percent infill is only needed 2 hour print. Enjoy.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for D22 cup holder insert for small cans?

Any FDM printer should handle D22 cup holder insert for small cans just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print D22 cup holder insert for small cans?

According to the design notes, D22 cup holder insert for small cans takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is D22 cup holder insert for small cans available in?

D22 cup holder insert for small cans is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is D22 cup holder insert for small cans free to download?

Yes, D22 cup holder insert for small cans is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

D22 cup holder insert for small cans

Add to Collection