D3P Multiboard adapter for Kobra S1

MULTIBOARD ADAPTER The model is for a side mounted attachment for a Multiboard panel. The system works with the Kobra S1 D3P Risers.  IMPORTANT: THIS MODEL ONLY WORKS WITH THE D3P RISER - IF YOU HAVE MY CLASSIC RISER OR DUAL ACE CLASSIC RISER USE THIS MODEL : https://www.makeronline.com/en/model/Multiboard%20adapter%20for%20Kobra%20S1%20Classic%20riser%20%20(single%20and%20dual%20Ace)/248356.html?trackModuleType=10 You can find more information about the D3P risers by clicking on the links: Kobra S1 D3P riser: https://cults3d.com/en/3d-model/tool/anycubic-kobra-s1-d3p-riser   The model consists of hooks to attach to the riser and adapter to snap on the Multiboard and stand off snaps.    The adapter can be mounted on the right or left side of the riser (as referenced when facing the printer). Plate 1 is for the right side and plate 2 is for a left side mount.   IMPORTANT: If you mount the Multiboard on the left of the printer (as referenced when standing in front of the printer and looking at it) the bolt will be a LEFT HAND THREAD which means you will need to turn COUNTER-CLOCKWISE TO SCREW IT IN AND CLOCKWISE TO UNSCREW IT!   A pdf instruction guide is also provided.    Unfortunately I am not all that familiar with the Multiboard system so I suggest you look at their website https://www.multiboard.io/ if you have any questions about generating your Multiboard or obtaining components for it. Thank you   3D PRINTING PRINT SETTINGS   IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing. I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.   A left and a right side option is provided. IMPORTANT: If you mount the Multiboard on the left of the printer (as referenced when standing in front of the printer and looki