DabRocket V1.0

This is a modified Heat Gun, designed for safe tabletop use. I used a Wagner heatgun core and the cord from it. I added a toggle switch and tip-over switch to replace the stock switch, and a new 1/2" strain relief for the cord. use a standard 50mm Thin Wall Borosilicate glass tube cut and fire polished to 120mm for the sleeve around the core. Use 2mmx5mm screws to connect the ring to the top cone, securing the heat gun core in place. Adjust the mounting ring for fit, make it 200% thickness if you do not want to glue the top on.

This is V1.0, and is still in development.
Refinements in Design and Printability are in the works.
Better instructions on the way soon, too.