Daft Punk Random Access Memories (HueForge)

This is a custom Hueforge of Daft Punk's Random Access Memories album cover. An AMS is required as the blue and yellow colours are sharing the same layers. If you rebuild the hueforge from the stl follow these layer colour change but you'll have to pain one half different than the other to get the blue and yellow in the same print. If you want it to work like in my pictures, just use my print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x183.75mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA Generic Black Transmission Distance: 0.2 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Marine Blue and Yellow At layer #18 (1.52mm) swap to Ivory White for the rest.