Dalinar Embraces Thrill| HueForge

I'm uploading a bunch of Stormlight Archive models from my collage, this one features Dalinar Embracing the Thrill from Oathbringer. Project: DalinarHug.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 250x168.34mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #10 (0.88mm) swap to Red At layer #13 (1.12mm) swap to Jade White for the rest.