Dan A4 Ultimate Cooling Kit

###Description:

UPDATED 8/19/2025: This is the final (final) versions of the Dan A4 (V3/V4/V4.1) Ultimate Cooling Kit revision 6. The following STL files are included along with their print settings:

* PSU Bracket: 0.15 Layer Height, 100% Infill, 3 Walls
* Riser Bracket: 0.15 Layer Height, 100% Infill, 3 Walls
* Radiator Bracket: 0.2 Layer Height, 40% Infill, 3 Walls, 2 Bottom Layers, 3 Top Layers
* Retention Bracket: 0.2 Layer Height, 100% Infill, 2 Walls
* PCI Spacer: 0.2 Layer Height, 40% Infill, 3 Walls, 2 Bottom Layers, 3 Top Layers
* PCI Clip: 0.15 Layer Height, 100% Infill, 2 Walls, Rotate 90 degrees for best strength
* Legs: 0.2 Layer Height, 40% Infill, 3 Walls, 3 Bottom Layers, 3 Top Layers

###The following brass threaded inserts are recommended:

* PSU Bracket: (4) M3x0.5 [Link](https://www.amzn.com/B07NBTCHP1)
* Riser Bracket: (2) M3x0.5 (Same as above)
* Radiator Bracket: (2) #6-32 [Link](https://www.amzn.com/B07NBMGJPD)

###Installation Guide: https://imgur.com/a/ajtZf