Tools & Spare Parts STL Download - Dance mirror holderby petfalcon

Good day everyoneThis was a present for my little ballerina.She wanted a mirror like in the dance studio and I was surprised at how "cheap" it was ( I am from western europe) so 250 euro is relatively cheap. But I have to do the assembling .So How to :The 3 bottom pieces are held in place by part 1 .I suggest printing the mirror template to accuratly position these .(make sure you print it correctly the middle pieces should be 150mm in width.You dont need a part 1 piece for every bottom piece.I also used a strip of foam of 2cm wide and about 8mm thick to better support the mirror.Once the bottom is set and bolted to your wall (or closetin my case measure where the top dovetail piece goes and attach 1 of the holders.Slide the holder up and down and check the fit with your mirror.If all looks good attach the dovetail slide on the top holder and slide it up .Place your mirror in the bottom holders place the mirror gently against the all and slide the top holders down.If you also used rubbers on the top holders these should hold your mirror snuggly.Now just admire your work and get a big hug from your little dancer.