DANDADAN (Episode 9)

Project: dandadan.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 122.07x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic BambuLab Green Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Green At layer #10 (0.88mm) swap to Orange At layer #12 (1.04mm) swap to Brown At layer #13 (1.12mm) swap to BambuLab Green At layer #17 (1.44mm) swap to Yellow At layer #22 (1.84mm) swap to Beige At layer #23 (1.92mm) swap