Dandadan Hueforge

MembershipBoost MeProject: Dandadan.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 235x235mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Yellow Transmission Distance: 5.5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Jade White At layer #17 (1.44mm) swap to Yellow At layer #20 (1.68mm) swap to Jade WhiteBorder Only Colors from here until the end. At layer #27 (2.24mm) swap to Red for the rest.