MakerWorld
Hueforge & Lithophane
Voir le modèle
Dandadan Hueforge
65
Téléchargements
50
Likes
29
Makes
Would love to see your prints!Every boost helps me create more hueforges and give back to the community! :) Okarun from Dandadan anime Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 178.21x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #12 (1.04mm) swap to RedAt layer #18 (1.52mm) swap to BrownAt layer #19 (1.6mm) swap to Jade White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
