Dark angel III

Picture source/author: SandySarten @sandysarten Then used HueForge v0.9.0 to create the model.   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 150x150mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 1.92mm and the Actual Depth is 1.92mm. Filaments Used: PLA Anycubic Black Transmission Distance: 0.3 PLA Sunlu META Grey Transmission Distance: 3.6 PLA Elegoo + Gray Transmission Distance: 3 PLA Aurapol Beige Transmission Distance: 2.4 PLA Elegoo Basic White Transmission Distance: 7 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #15 (1.28mm) swap to Gray At layer #18 (1.52mm) swap to Beige At layer #20 (1.68mm) swap to White for the rest.