Thingiverse
Dart flight punch guide
door JipJapJeppe
0
Downloads
0
Likes
0
Makes
Dart flight punch guide for Leitz paper hole-punchers.
Made for Standard size 6 flights.
Hole diameter: Ø6mm
Thickness of part to be inserted into hole puncher: 2.4mm.
2 variants:
1. Slimmer variant of thickness 1.8mm to fit narrower openings
2. Slimmer & without alignment bump for use with any hole puncher
**Print settings:**
Nozzle: 0.4mm HF
Layer height: 0.15mm
Brim width: 4mm
Support: none
Create a variant with onshape:
https://cad.onshape.com/documents/a16a544c6dc1f9c9ca6c826c/w/d9bc62fe483e9fdf617d284f/e/dfb36a4a8aed9d022e390085?renderMode=0&uiState=698458a5a1db0560a4129a58
Made for Standard size 6 flights.
Hole diameter: Ø6mm
Thickness of part to be inserted into hole puncher: 2.4mm.
2 variants:
1. Slimmer variant of thickness 1.8mm to fit narrower openings
2. Slimmer & without alignment bump for use with any hole puncher
**Print settings:**
Nozzle: 0.4mm HF
Layer height: 0.15mm
Brim width: 4mm
Support: none
Create a variant with onshape:
https://cad.onshape.com/documents/a16a544c6dc1f9c9ca6c826c/w/d9bc62fe483e9fdf617d284f/e/dfb36a4a8aed9d022e390085?renderMode=0&uiState=698458a5a1db0560a4129a58
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
