Thingiverse
Dartboard LED Ring and Camera Mount V2
by viperman3
95
Downloads
150
Likes
4
Makes
Wanted to make LED ring and Camera mounts for my Dartboard Setup which was easy to print. This design is adapted from this website (https://docs.autodarts.io/3d-printing/).
Github for autodarts is https://github.com/autodarts
Discord server is https://discord.com/servers/autodarts-community-802528604067201055
All parts except for the camera cover can be printed without any supports.
I printed mine at 0.28mm layer height with a 0.4mm nozzle using PLA Plus without any issues. LED segments were glued using 5 minute epoxy adhesive. Hardware requires is M4x20 and M4x18 Socket Button-head screws with M4 hex nuts. The OV2710 USB Camera Module is held with M2x6 screws as is the Camera Cover
Assemble the LED ring elements with the connection pegs using 5 minute epoxy.
Update 3/24/2023: Added Ring Light - Connection Peg - More Clearance.stl (Connector Peg with 0.3mm clearance for easier assembly)
Update 2/21/2024: Added "Ring Light v2" Prefixed models that add provision to block light-bl
Github for autodarts is https://github.com/autodarts
Discord server is https://discord.com/servers/autodarts-community-802528604067201055
All parts except for the camera cover can be printed without any supports.
I printed mine at 0.28mm layer height with a 0.4mm nozzle using PLA Plus without any issues. LED segments were glued using 5 minute epoxy adhesive. Hardware requires is M4x20 and M4x18 Socket Button-head screws with M4 hex nuts. The OV2710 USB Camera Module is held with M2x6 screws as is the Camera Cover
Assemble the LED ring elements with the connection pegs using 5 minute epoxy.
Update 3/24/2023: Added Ring Light - Connection Peg - More Clearance.stl (Connector Peg with 0.3mm clearance for easier assembly)
Update 2/21/2024: Added "Ring Light v2" Prefixed models that add provision to block light-bl
viperman3 also publishes on
8 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!