Darth Maul

Project: maul.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #15 (1.28mm) swap to Red At layer #18 (1.52mm) swap to White for the rest. _____________________________________________________________________If you like my models and would like to support my 3D printing endeavors, I now have a Patreon! Subscribing to the $10 tier will grant you a commercial license to sell the