Darth Vada

darth vada hue forge from star wars Project: darth vader.jpgPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 113.13x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Prusament Wine Pigment Transmission Distance: 2.8 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Wine Pigment At layer #9 (0.8mm) swap to Black At layer #16 (1.36mm) swap to Grey At layer #23 (1.92mm) swap to White for the rest.