Darth Vader HueForge with frame

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Blue At layer #16 (0.76mm) swap to Red At layer #23 (1.04mm) swap to Turquoise At layer #26 (1.16mm) swap to Yellow At layer #34 (1.48mm) swap to Jade White for the rest.