Darth Vader Samurai

Everyone's favorite Sith Lord, Darth Vader, dressed as a samurai. HueForge DescriptionNote: This project uses two white filaments. One with a high transmission distance and one that's very low. If you have a mid-TD white, you can probably use that for layers 12-17 instead of swapping at layer 16. Project: DarthVaderSamurai.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2mm Filaments Used:#000000 PLA Sunlu Black Transmission Distance: 0.3#ffffff PLA Sunlu Meta White Transmission Distance: 7.5#ffffff PLA+ Anycubic Brilliant White Transmission Distance: 1#ff3520 PLA+ Anycubic Bright Red Transmission Distance: 3.8This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #12 (1.04mm) swap to WhiteAt layer #16 (1.36mm) swap to Brilliant WhiteAt layer #18 (1.52mm) swap