Thingiverse
DARTZONE STRYKER BOLT ACTION CONVERSION
9
Downloads
6
Likes
0
Makes
This is a mod kit by DB to convert your Dartzone Max Stryker into a bolt action blaster.
This mod is compatible with full or half length darts, and magazine and/or breach loading.
Just decide which side you want the bolt on (left or right), then print those parts. If you want it to only have breach loading, then print the Breach Loading Only Part as well.
Print settings:
For the bolt, use 100% infill, 2mm layer height, and supports. For the orientation, make sure the letters DB are facing up.
For the Rail, use 20%-100% infill, doesn't really matter, 2mm layer height, and supports. Orientation doesn't matter.
For breach loading only part, use 100% infill, 2mm layer height, and supports. Make sure the orientation is the full circle touching the build plate, so it is standing straight up. Be sure that your adhesion is good when printing this.
This mod is compatible with full or half length darts, and magazine and/or breach loading.
Just decide which side you want the bolt on (left or right), then print those parts. If you want it to only have breach loading, then print the Breach Loading Only Part as well.
Print settings:
For the bolt, use 100% infill, 2mm layer height, and supports. For the orientation, make sure the letters DB are facing up.
For the Rail, use 20%-100% infill, doesn't really matter, 2mm layer height, and supports. Orientation doesn't matter.
For breach loading only part, use 100% infill, 2mm layer height, and supports. Make sure the orientation is the full circle touching the build plate, so it is standing straight up. Be sure that your adhesion is good when printing this.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
