Darumaka Hueforge

This is my first ever hueforge so if you have any tips or comments it'll be greatly appreciated!




Print Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x176.42mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 4mm and the Actual Depth is 4.1mm





Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 7
PLA BambuLab Basic Jade White Transmission Distance: 4
This print uses 5 unique filaments


Swap Instructions:
Start with Black
At layer #22 (1.84mm) swap to Red
At layer #32 (2.64mm) swap to Orange
At layer #40 (3.28mm) swap to Yellow
At layer #43 (3.52mm) swap to Jade White for the rest.