DaVinci Head Cleaner for Cyclops

Edit: Fixed Amazon Link.

I couldn't find a good way to clean the head of the E3D Cyclops on the DaVinci so I decided to make my own brush. Created in SolidWorks and included the native file as I am sure this can be improved upon.

I drilled two holes in the metal and held it in place with:
2x m3x10 screws
2x m3 washer
2x m3 nut

Additionally, I used two brush heads that I broke off the handles and cut the second middle bristle bunch from either end so there was room for the zip ties. I found 2 brushes forced the zip ties to hold the brushes better.

Additional items:
2x zip ties for holding the brush
2x brush heads with handle broken off. Ones I used are linked below.
http://a.co/70JW5k9

The macro I used in the TPOST of the duetwifi are (credit goes to deckingman on the Duet3D forums for struggling through this originally so I didn't have to):

G90 ; set absolute positioning …..(just to be on the safe side)
M83 ; Set relative extruder.........(just in case)